Penguard Express ZP Part A Grey 16L
Code: 2920/A/16
Penguard Express ZP is a fast-drying and high-build epoxy coating pigmented with active zinc phosphate. Penguard Express ZP is specially designed for new construction, is a high-solids product and can be used as a primer, midcoat, finish coat or as a single-coat system in atmospheric conditions. Penguard Express ZP is pigmented with active zinc phosphate for increased corrosion protection, and has very fast dry-to-recoat or dry-to-handle properties. Penguard Express ZP is suitable to use on properly prepared carbon steel, aluminium, concrete and galvanised steel substrates. It can be applied at sub-zero surface temperatures. Penguard Express ZP is suitable for application up to C5 environment.
- Pigmented with active zinc phosphate
- Fast dry-to-recoat
- Fast dry-to-handle
- Designed for new construction
This is a two component amine cured epoxy coating.
It is a fast drying, zinc phosphate pigmented, high solids, high build product.
Specially designed for new construction where short dry to handle and over coating times are required.
Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.
Suitable for properly prepared carbon steel substrates.
It can be applied at sub zero surface temperatures.
Typical use:
Suitable for structural steel and piping to be exposed to highly corrosive environments, C5I or C5M (ISO 12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment.
Mixing Ratios:
4:1 +0% Jotun Thinner No. 17