Tuff Floor/Concrete WB Epoxy Sealer Pack 10L Kit
Code: 56-700.10
A waterborne, two pack, clear epoxy sealer for concrete.
TYPICAL USES:
Sealing of concrete, generally prior to over coating with epoxy finishes such as TUFF FLOOR WB EPOXY, TUFF FLOOR WB EPOXY LEVELLING.
Also for immersed situations such as swimming pools to be overcoated with EPOTEC NT, 1K AQUA pool paint.
PERFORMANCE:
Formulated to aid in binding loose surfaces and seal concrete, providing a sound, firmly adherent base for epoxy top coats.
The water based formulation offers the advantage of fast cure, easy clean up and low odour.
Benzyl alcohol free.
Excellent water vapour permeability – can be applied to damp substrates.
Visible end of pot life indicated by rapid viscosity increase.
LIMITATIONS:
Not recommended for extreme chemical environments, or areas of high physical abuse if used without a top coat.
Not recommended without topcoat for areas of high UV exposure.
Product will yellow and lose gloss under these conditions.
Ensure air and substrate temperature are above 5oC before and during application.
Overcoat within 5 days. If longer than 5 days elapses before recoating, surface should be first sanded using 120-150 grit sandpaper.
Thoroughly remove sanding dust by vacuuming and washing.
SPREAD RATE:
Theoretical Coverage: 5-15 m2/litre/coat.
Coverage depends on surface profile and porosity.
Mixing Guide:
10:6:8 by weight
(Part A: Part B: Water)