3M™ PPS™ Series 2.0 Spray Cup System Large Kit (850 ml) with 125u filter
Code: UU008299776
3M™ PPS™ Series 2.0 Spray Cup System is our next generation,highest performing disposable spray cup system formixing/measuring, filtering, spraying in any direction (360°spray rotation) and protecting coatings not in use. Each lidand liner kit contains 50 disposable lids with integratedcollars and full diameter filters, 50 disposable liners, 1reusable hard cup and 32 sealing plugs.
The Heart of 3M™ PPS™ Series 2.03M™ PPS™ Series 2.0 Kit features the next generation of the3M™ PPS™ paint preparation system. It contains all of thereusable, disposable components of the system: 50 disposablelids with integrated collars and full diameter filters, 50disposable liners, 1 reusable hard cup and 32 sealing plugs.The 3M™ PPS™ system features disposable lids, liners andhard plastic cups in 5 sizes: 3oz (90mL), 6.8oz (200mL),13.5oz (400mL), 22oz (650mL) and 28oz (850mL). A choice ofsizes offers maximum efficiency for every job, and helpslower your cost per use.
Next Generation of the 3M™ PPS™ Paint Preparation SystemThe 3M™ PPS™ Series 2.0 Spray Cup System is our latest,best-performing disposable spray cup system. The system hasbeen redesigned from the connection to the cup, and has beenimproved in six ways offering a complete disposable spraycup solution for mixing/measuring, filtering, spraying andfor temporary sealing and protection of sprayable coatings.
Cleanest Disposable Cup SystemEvery PPS™ Series 2.0 lid features a quarter-turn lidlocking system to help reduce paint build-up and possiblecontamination. Additionally, each lid and liner kit containsa new hard cup which also features universal mixing ratiosbuilt into the cup, eliminating the need for separateinserts and helping ensure the most accurate mix possible.
Reduce Material Waste by Mixing in the Cup3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups includea clear access window to help you see how much material isleft while spraying. The window also allows you to hold theliner for easier, cleaner lid removal. This is especiallyuseful during refills or tinting.
Improved Fluid Flow for More Consistent Paint ApplicationOur 3M™ PPS™ Series 2.0 Lids feature a domed geometry thatallows up to 3 oz (90mL) of material below the filter duringon-demand spraying. This reduces sputter and otherinconsistencies in spray performance. Lids also feature awider spout for improved fluid flow. A built-infull-diameter filter delivers the highest quality filtration– no assembly needed.
More Confidence in the Connection to Your GunA new adapter design provides a four-point connection and awider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do morethan just seal. For instance, you can turn the cup upsidedown and use the new sealing plug as a base for temporarysealing and protecting, helping keep the built-in filter wetand reducing the need for replacement lids.
A System for Both Solvent-Based and Waterborne ProductsEvery lid features a built-in full diameter filter availablein 200 micron or 125 micron mesh. Be sure to consult thepaint or coatings manufacturer for the recommended filter mesh size.
Use the Right Size Cup for Every Repair Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz(90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.
Reduce Solvent Usage by up to 70%After spraying, the painter can use the sealing plug to sealand protect the paint or coating for later use or simplydiscard the lid and liner, leaving only the adapter andspray gun to clean. Discard the disposable lid and liner inaccordance with local government requirements. Use a smallamount of solvent for cleaning the spray gun and the PPS™Adapter. Shops using PPS™ Series 2.0 often experience a 70%reduction in cleaning solvent usage. Most guns can becleaned with less than 3 oz. of solvent.
Your Spray Gun Functions at any Angle, Even Upside DownBecause PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows thepainter to spray consistently at 90° to the part, no matterhow the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.
Reduces the Chance of Contamination Between JobsBecause the painter uses a new disposable lid and liner foreach mix, there is less risk of outside contamination. Usinga fresh lid and liner with each paint job, rather thanwashing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.
The Bottom Line: Why 3M™ PPS™ Series 2.0 is the DisposableCup of Choice3M™ invented disposable cups for paint application and willcontinue to re-invent based on our customer’s feedback. Whatcustomers have taught us, is that trust and confidence intheir disposable paint cup system is king. The consistentperformance of the 3M™ PPS™ System has earned the trust ofexperts in one of the most important parts of a repair ormanufacturing process – paint application. PPS™ Series 2.0is the culmination of more than 15 years of painter feedbackand a true next generation all-in-one disposable paintingsystem that produces cleaner jobs, saves on paintconsumption and reduces solvent usage by up to 70%.
- 3M™ PPS™ Series 2.0 is our next generation, highestperforming disposable spray cup system
- New quarter-turn lid locking system locks lid to cup andeliminates paint build up and cross threading
- Redesigned adapters provide four points of connection fromspray gun to lid, improving stability and confidenceespecially in large applications
- Domed lid geometry and a wider fluid spout allows up to 3fl. oz. (90 mL) of material to be held below the filter reducing inconsistent spray due to air-entrapment and sputter
- Full-diameter filters are built into every lid for thehighest quality filtration; aids with fluid flow
- A new reusable hard cup is included in every lid/liner kit
- Mixing ratios are printed on each cup and a clear access window allows users to grasp liner while removing the lid,making tinting/refilling easier
- Enlarged sealing plugs provide stable base for cups to beplaced upside down, keeping filters wet during temporarysealing and protection of coatings not in use
- 3M™ PPS™ (Legacy) red dispensers can be used with 3M™ PPS™Series 2.0
- 3M™ PPS™ reduces cleaning solvent consumption by up to 70%and reduces prep and clean-up time by up to 50%; compared toconventional paint cup systems